Arboritec Clean n’ Coat is a great product for cleaning a hardwood floor, then putting a new coat on the floor. This hardwood flooring product seriously will clean any floor and make it look new again. Think a wood floor is past saving, this product might surprise you. Clean n coat instructions:
- vacuum and lightly clean the floor
- Spray the floor with clean n coat
- let spray sit for 30-60 seconds
- manually or abrade with a buffer
- Clean off with a damp towel
Clean n’ Coat can be used under any water based finish from Arboritec. It is important to never use this product on raw wood. It also cannot be used on floors that have been polished or waxed because these products can affect adhesion.
Alen T – :
You want to buff and recoat your floor than Clean n’ Coat is the product you want to go to. Clean n’ Coat is a superb product, It enriches the adhesion of the new coat of finish by deep cleaning and slightly softens the old finish coat. This product has never let us down and we do recoats every day.
Jeffery – :
I use clean n coat for all my buff and coats. This makes it so easy to clean the floor and get it ready for applying a new coat. I am a true believer in maintenance coats and Arboritec Clean n’ Coat makes the process so easy.